ReadyPlanet.com
dot dot dot
dot
SUPER SEARCH ค้นหาสินค้า

dot
dot
ALL INDUSTRIAL EQUIPMENTS
dot
bulletAutomation & Machinery
dot
HYDRAULIC HI-POWER 700 Bar ระบบไฮดรอลิคทุกอุตสาหกรรม
dot
bulletHydraulic HI POWER 700 BAR
bulletHYDRAULIC HI-POWER SERVICE CENTER ศูนย์บริการ และ จำหน่าย ระบบไฮดรอลิค อุตสาหกรรมหนัก
bulletHydraulic System Set-up
dot
ENERPAC HYDRAULIC TOOLS
dot
bulletENERPAC CYLINDER
bulletENERPAC HAND PUMP 700 Bar
bulletENERPAC ELECTRIC PUMP
bulletENERPAC AIR HYD. PUMP
bulletENERPAC TORQUE WRENCH
bulletENERPAC HYD.PULLER
bulletENERPAC VALVE 10000 psi
bulletENERPAC HOSE & FITTINGS
bulletENERPAC Hyd.PressureGauge
bulletENERPAC SYS.COMPONENTS
bulletENERPAC HYD. PRESSES H - Frame Press , Roll Frame Press
dot
HI-POWER HYDRAULIC TOOLS
dot
bulletHI-POWER CYLINDER
bulletHI-POWER HANDPUMP 700BAR
bulletHI-POWER TORQUE WRENCH ประแจไฮดรอลิค อุตสาหกรรมหนัก
bulletHI-POWER ELECTRIC PUMP > Cylinder > Torque wrench Pump
bulletHI-POWER HOSE & FITTINGS
bulletKRUMOR HYD.COMPONENTS
dot
HIGH POWER HYDRAULIC TOOLS
dot
bulletHI-POWER Cylinder 700Bar
bulletHI-POWER HANDPUMP700Bar
bulletHYD.PULLER ชุดเหล็กดูด 3 ขา 2/3 ขา เหล็กดูดมู่เล่ย์ ชุดถอด แบริ่งชุดถอดพู่เล่ย์ จานเหล็กดูดแบริ่ง
bulletHI-POWER Pump.Air/Electric Pump.Foot Pump
bulletHI-POWER HOSE & FITTING
bulletHI-POWER VALVE 10000psi
bulletTOE JACK แม่แรงยกข้าง&ยกบน
bulletฺBOTTLE JACK แม่แรงกระปุก
bulletMACHINE ROLLER LOAD SKATES ล้อแม่แรงเคลื่อนย้ายเครื่องจักร ตัวเต่าลากในงานอุตสาหกกรรมหนัก ตัวเต่า แมชชีนโรลเลอร์ 1 ตัน - 10 ตัน
bulletHI-POWER AUTOMATIC GREASE/OIL LUBRICATOR กระปุกอัดเติมจารบีอัตโนมัติ/กระปุกน้้ำมันหล่อลื่นอัตโนมัติ เพื่อเครื่องจักรทุกประเภท
bulletHI-POWER Bearing Fitting Tools ชุดตอกแบริ่ง ไฮ-พาวเวอร์
dot
KUDOS HYDRAULIC TOOLS
dot
bulletKUDOS Hyd.Crimpers Head คีมย้ำหางปลา คีมย้ำหัวสาย ชุดปั๊มมือโยกครบชุด
bulletKUDOS Hyd.Crimpers คีมย้ำหางปลา ย้ำหัวสายไฮดรอลิกในตัวคีมย้ำ
bulletKUDOS Hex.Dies ดายหกเหลี่ยม หัวหกเหลี่ยม คีมย้ำหางปลา CU,AHE,HYCP,UCP
bulletKUDOS CUTTER HEAD คีมตัดสายไฟฟ้า ไฮดรอลิกแรงตัดสูง สายเคเิบิล ลวดเหล็กกล้า ตัดโลหะ ชุดปั๊มมือโยก
bulletKUDOS HYD.CUTTER เครื่องตัดสาย/ลวดสลิง ไฮดรอลิกในตัว
bulletKUDOS NUT SPLITTERS เครื่องตัดหัวน็อตไฮดรอลิค
bulletKUDOS NUT SPLITTERS เครื่องตัดหัวน็อตไฮดรอลิค
bulletKUDOS PUNCHERS & BENDERS เครื่องเจาะรูแผ่นเหล็ก สแตนเลส น๊อคเอ้าท์ไฮดรอลิก
bulletKUDOS BATTERY TOOLS
bulletKUDOS HAND TOOLS
dot
OTHERS HYDRAULIC JACK/ PUMP
dot
bulletHYDRAULIC HI-POWER 700 BAR / 10000 psi
bulletALLEN DRIVE TORQUE WRENCH
bulletPOWERTEAM USA HYD.
bulletRAMPAC Hyd. Cylinder
bulletMASADA JACKS
bulletSKF BEARING FITTNG TOOLS ชุดตอกแบริ่ง SKF
dot
INDUSTRIAL FACTORY MACHINERY TOOLS & INSTRUMENTS
dot
dot
DYNISCO ( U.S.A )
dot
bulletDYNISCO Transducers Transmitter & Digital Pressure Indicator
bulletDYNISCO Pressure Indicator
bulletDYNISCO CABLE&CONNECTOR
dot
MANOSTAR
dot
bulletMANOSTAR WO81 Series: WO81FN WO81FS WO81FT
bulletMANOSTAR WO70
bulletManostar Pressure Switch MS61A
dot
SUGINO
dot
bulletSUGINO Hydro Speed Regulator RB , R series
bulletSUGINO Hydro Speed Regulator RR series
dot
MUTOH DIGICOLLAR (Mutoh Engineering Japan)
dot
bulletMutoh Linear Encoder D-1000Z
bulletMutoh Rotary Encoder
bulletMutoh Digital Counter
bulletDigicollarDigital Measure
bulletMUTOH DIGICOLLAR All Models
bulletMUTOH Accesories
dot
SAGINOMIYA
dot
bulletPressure Control SNS HNS
bulletSaginomiya Pressure Controls & Sensors
bulletSaginomiya Flow Control
bulletTEMP.& HUMIDITY CONTROL
bulletEXPANSION VALVES
bulletSaginomiya Digital Thermostats ULE & FLE
dot
POWER CONTROL GEAR MOTOR / PUMP & MOTOR
dot
dot
NIPPON OIL PUMP
dot
bulletNOP Trochoid Pump
bulletTrochoid Pump Flow 1-8 litre/min TOP 1A, 1MA, 1HG, 1ME, 1MBY
bulletTrochoid Pump Flow 4-36 litre/min.TOP-203HB,TOP-204HB,TOP-206HB,TOP-208HB,TOP-210HB,TOP-212HB,TOP-216HB,TOP-220HB
bulletTrochiod pump with Motor TOP-2MY , TOP-2MW
bulletNOP Coolant PUMP TOP-2HWM High Pressure Coolant 2HWNPE VB Coolant Suct.Filter
bulletTrochoid Pump Flow 3 - 117 litre/min TOP N3H, TOP N3F, TOP3MF,TOP-3MBY
bulletTrochoid Pump Flow 116 - 586 litre/min TOP-4S,TOP-4AMVB,TOP-4A,GPL,TOP-4MBY
bulletReversible Pump ปั๊มหมุนกลับได้ 2RA,3RD
bulletFuel Pump ปั๊มน้ำมันเชื้อเพลิง GFS,GF,GFK,GFL,GFH,GD,GFM
bulletNOP Filtration Pump ปั๊มกรองไมโครท็อป
bulletNOP Relief Valve, TOP-2VB,TOP-VBD
bulletNOP Coupling คับปลิ้ง
bulletNippon Oil Pump Japan Reduction Gear GPS-1 , GRS-6 ,GRS-2
bulletOrbmark Motor & White Hyd.Motor
dot
KORNYLAK TRANSWHEELS ใช้ในงานลำเลียง งานคอนเวเยอร์
dot
bulletTranswheel
bulletKornylak Transwheels
bulletSUPER TRANSWHEEL
dot
SUMITOMO GEAR MOTOR
dot
bulletSumitomo CYCLO DRIVE Gear Motor CNHM CHHM
bulletSumitomo CYCLO DRIVE Gear Motor CNVM , CVVM
bulletSUMITOMO CYCLO DRIVE CNH,CHH,CNV,CVV Gear Reducer
bulletHYPONIC DRIVE Gear motor
bulletSUMITOMO INVERTER
bulletSUMITOMO ASTERO
bulletSUMITOMO ALTAX Gear
bulletSUMITOMO BEIER VARIATOR
dot
ENOMOTO MICRO PUMP
dot
bulletENOMOTO MICRO PUMP
bulletSUMITOMO BUDDY BOX Gear
bulletSUMITOMO PREST Gearmotor
dot
KANSAI AUTOMATION
dot
bulletLevel Indicator
dot
MITSUBISHI
dot
bulletBrake & Clutch
bulletGreared Motor
bulletMotor
dot
A&D Load Cell
dot
bulletRelief Value
bulletBrake & Clutch
bulletMotor
bulletDirectional Value
bulletDisc Brake
bulletInternal Gear Pump
dot
SUNTES
dot
bulletAir Hydraulic Booster
bulletFoot Pedal Unit
bulletHydraulic Disc Brake
bulletMechanical Disc Brake
bulletMini Caliper & Mini Disc
bulletPad
bulletPneumatic Disc Brake
bulletPosition Clamper
bulletPower Control System
bulletSA Electromagnetic Disc Brake
bulletSA Hydraulic Disc Brake
bulletSA Pneumatic Disc Brake
dot
TAIHEI BOEKI
dot
bulletPressure Switch
bulletElectric Cylinder
dot
TOWA SEIDEN
dot
bulletLevel Switch
bulletDifferential Pressure Gauge
bulletIndustrial Product Brand - A
dot
PRODUCT BRAND LIST 2019
dot
bulletIndustrial Product Brand - B
bulletIndustrial Product Brand - C
bulletIndustrial Product Brand - D
bulletIndustrial Product Brand - E
bulletIndustrial Product Brand - F
dot
NIPPON MAGNETIC HAMMER ,Japan
dot
bulletNNI MAGNETIC HAMMER SIC
bulletNMI MagHammer SIC-0.5A
bulletNMI MagHammer SIC-1A
bulletNMI MagHammer SIC-2A
bulletMagHammer SIC-0.5AS
bulletMagHammer SIC-1AS
bulletMagHammer SIC-2AS
bulletMagHammer SIC-3AS
bulletNMI Controller SB-1A
bulletNMI Controller SB-2A
bulletNMI Controller SN-1A
bulletNMI Controller SN-2A
dot
ACT
dot
bulletPressure Switch
dot
WORLD Inter-Industrial FactoryTechno Fair & Exhibition 2013
dot
bulletPUMPS : Hand Pump , Foot Pump , Electric Pump , Air Hydraulic Pump




dot
ENERPAC TORQUE WRENCH

 ENERPAC S-Series, Square Drive Hydraulic Torque Wrenches

 
  • Enerpac hydraulic torque wrenches were designed using state-of-the art CAD techniques to bring you the most advanced square drive hydraulic torque wrench on the market.
  • Rigid steel design guarantees durability, reliability and safety.
  • Push button square drive release for quickly reversing the square drive for tightening or loosening
  • Fine tooth ratchet prevents tool “lock-on”
  • 360 degree swivel manifold with screw lock couplers
  • Optional Allen key drives 14-85 mm, 1/2 - 2 1/4 inch
  • Fast operation due to the large nut rotation per wrench cycle (35 degree) and rapid return stroke
  • Constant torque  provides hi-accuracy (± 3%) across the full stroke
Typical Socket Size Range Square
Drive
Maximum Torque *
at 700 bar
Model
Number
Weight Optional
Allen-Key Range
mm inch inch Nm Ft.lbs   kg mm inch
15 - 50 5/8 - 1 7/8   3/4 1898 1400 S1500 2,7 14 - 24 1/2 - 1
20 - 100 7/8 - 3 7/8 1 4339 3200 S3000 5,0 17 - 32 5/8 - 1 1/4
41 - 155 1 5/8 - 6 1/4 1  1/2 8144 6010 S6000 8,5 17 - 32 5/8 - 1 1/4
41 - 155 1 5/8 - 6 1/4 1  1/2 14914 11000 S11000 15,0 30 - 46 1 1/4 - 1 3/4
60 - 255 2 3/8 - 10 2  1/2 34079 25140 S25000 31,0 36 - 85 1 1/2 - 2 1/4

* Determine maximum torque according to the bolt (nut) size and grade.

สอบถามข้อมูลเพิ่มเติม : ติดต่อ ฝ่ายขายสินค้าอุตสาหกรรม Tel 02-2358589 , 02-6349944 (info@victorysystem.com)

 

ENERPAC W-Series, Low Profile Hex. Hyd.Torque Wrenches

 
  • Enerpac torque wrenches were designed using state-of-the art CAD techniques to bring you the most advanced low profile hexagon torque wrench on the market
  • Rigid steel design – durabilty, reliabilty and safety
  • No tools needed for changing hexagon heads
  • Versatility: one hydraulic drive unit per torque capacity can be used to drive any hexagon head within that range
  • Innovative, pinless wrench construction with quick release drive and automatic crank engagement
  • Fast operation due to the large nut rotation per wrench cycle (30 degree) and rapid return stroke, double-acting
  • Constant torque  provides hi-accuracy (± 3%) across the full stroke
  • 360 degree swivel manifold with screw lock couplers
  • Optional interchangeable metric and imperial hexagon heads and reducer inserts
Optional
Hexagon 
Heads
Maximum
Torque*
at 700 bar
Drive Unit
Model
Number
Drive
Unit
Weight **
mm inch Nm Ft.lbs kg
36 - 60 1 1/8 - 2 3/8 2712 2000 W2000 1,4
36 - 85 1 5/16 - 3 1/8 5423 4000 W4000 2,0
50 - 105 1 7/8 - 3 7/8 10846 8000 W8000 3,0
65 - 115 2 7/16 - 4 5/8 20337 15000 W15000 4,9
75 - 135 2 15/16 - 5 3/8 30510 22500 W22000 7,7
80 - 155 3 1/8 - 6 1/8 47453 35000 W35000 11,4

* Determine maximum torque according to the bolt (nut) size and grade.
** Weight of drive unit without hexagon head.

สอบถามข้อมูลเพิ่มเติม : ติดต่อ ฝ่ายขายสินค้าอุตสาหกรรม Tel 02-2358589 , 02-6349944 (info@victorysystem.com)

 

ENERPAC SQD-Series, Square Drive Torque Wrenches

 
  • Enerpac square drive wrenches feature a very high torque-to-weight ratio
  • High speed, double-acting operation
  • High degree of rotation angle for increased productivity
  • Never-jam mechanism
  • High repeatability, with accuracy ± 3%
  • Slim nose radius and 360˚ swivel hose connection allow easier positioning in confined areas
  • Few moving parts means durability and low maintenance
  • Push-button drive release; no tools needed to reverse square or Allen drives for tightening or loosening
  • Storage case (included) protects from damage, water and dirt
  • Lock-ring couplers are standard on all torque wrenches, pumps and hoses.
Typical Socket Size Range Square
Drive
Maximum
Torque *
at 800 bar
Model
Number
Weight** Optional
Allen-Key Drive
Range
mm inch inch Nm Ft.lbs kg mm inch
15 - 50 11/16 - 1 7/8 3/4 2350 1735 SQD-25-I 2,5 14 - 24 1/2 - 1
20 - 100 7/8 - 3 7/8 1 4800 3550 SQD-50-I 4,3 17 - 32 5/8 - 1 1/4
30 - 110 1 1/8 - 4 3/8 1 1/2 7560 5570 SQD-75-I 6,7 17 - 32 5/8 - 1 1/4
40 - 120 1 5/8 - 4 3/4 1 1/2 10000 7360 SQD-100-I 8,0 22 - 36 7/8 - 1 1/2
60 - 155 2 3/8 - 6 1/8 1 1/2 16000 11835 SQD-160-I 12,0 30 - 46 1 1/4 - 1 3/4
80 - 255 3 1/8 - 10 2 1/2 27000 19875 SQD-270-I 24,5 36 - 70 1 1/2 - 2 1/4

* Determine maximum torque according to the bolt (nut) size and grade.
** Weight including reaction arm and square drive.

สอบถามข้อมูลเพิ่มเติม : ติดต่อ ฝ่ายขายสินค้าอุตสาหกรรม Tel 02-2358589 , 02-6349944 (info@victorysystem.com)

ENERPAC HXD-Series, Hex. Cassette Hyd. Torque Wrenches

 
  • Enerpac hexagon cassette wrenches feature a high torque-to-weight ratio, slim nose radius and flat design
  • High speed, high degree of rotation angle
  • Snap in, interchangeable cassettes, no tools required
  • 360˚ swivel hose connection allows easier positioning in confined areas
  • High repeatability, with accuracy ± 3%
  • Strong unibody design, integrated reaction arm and few moving parts make wrenches durable and reliable
  • Extensive range of metric and imperial hexagon cassettes and reducers
  • Drive unit and cassette come in storage case to protect from damage, water and dirt
  • Lock-ring couplers are standard.
Maximum
Torque *
at 800 bar
Drive
Unit
Model
Number
Weight Optional
Hexagon Cassette Range
CC-series
Optional
Reducer Insert Range
IN-series
Nm Ft.lbs kg mm inch mm inch
3290 2425 HXD-30 1,6 32 - 60 1 1/4 - 2 3/8 30 - 55 1 1/4 - 2 3/16
6190 4565 HXD-60 2,5 41 - 80 1 5/8 - 3 1/8 36 - 75 1 5/8 - 2 15/16
12500 9220 HXD-120 4,8 55 - 100 2 3/16 - 3 7/8 41 - 95 1 13/16 - 3 1/2
24210 17860 HXD-240 8,2 80 - 130 2 9/16 - 5 65 - 125 2 3/4 - 4 5/8

* Determine maximum torque according to the bolt (nut) size and grade.

ENERPAC THC, THQ-Series, Torque Wrench Hoses

 
  • Thermoplastic torque wrench hoses
  • Dual hoses, 6 and 12 meters long
  • THQ-700-series with spin-on couplers for:
    • 700 bar S and W-series torque wrenches
    • torque wrench pumps with suffix “Q”
  • THC-700-series with lock-ring couplers for:
    • 800 bar SQD and HXD-series torque wrenches
    • torque wrench pumps
For use with torque wrenches Twin Safety Hoses
Model Number
Coupler Modelnr.  included Coupler
Thread
Max.
Flow
Capacity
700 bar
S, W-series
800 bar
SQD, HXD-
series
Hose end one
Female Half
Hose end two
Male Half
6 m. long 12 m. long NPTF l/min
THQ-706T THQ-712T TR-630 TH-630 1/4" 11,4
THC-7062 THC-7122 CFF-250 CMF-250 1/4" 6,1

สอบถามข้อมูลเพิ่มเติม : ติดต่อ ฝ่ายขายสินค้าอุตสาหกรรม Tel 02-2358589 , 02-6349944 (info@victorysystem.com)

 

ENERPAC GT-Series, Hydraulic Bolt Tensioners

 
  • Enerpac hydraulic bolt tensioners have six load cells from M16 to M95 or from ⅝" to 3¾"
  • Twin ports for quick connection of multiple tools
  • Only one size of bridge per size of load cell
  • Detachable and rotational bridge simplifies bolt tensioner positioning
  • Full bridge window
  • Piston stroke indicator
  • Black surface treatment protects against corrosion
  • Anti-slip grip for more secure handling
  • Universal and multi-use tool.
Load Cell and
Bridge Reference
Bolt Range Cylinder Effective Area Load Capacity at 1500 bar Stroke Weight
(mm) (inch) (mm2) (kN) (mm) (kg)
GT1-LCB M16-M30 ⅝ -1 1495,4 224,3 10 3,0
GT2-LCB M30-M39 1⅛ -1½ 2677,2 401,5 10 4,1
GT3-LCB M39-M52 1½ -2  5127,1 768,9 10 7,0
GT4-LCB M52-M68 2 -2½ 9782,1 1466,9 10 12,2
GT5-LCB M68-M80 2½ -3¼ 15079,7 2261,4 10 18,7
GT6-LCB M80-M95 3¼ - 3¾ 18972,1 2845,1 10 27,8

 

Load Cell and
Bridge Reference
Thread Size Adaptor Kit Model Number Pitch Between Bolts Minimum Height Weight
(mm) (mm) (kg)
GT1-LCB M16 x 2 GT1PM-NRS01620 55 169 1,58
M18 x 2,5 GT1PM-NRS01825 56 165 1,51
M20 x 2,5 GT1PM-NRS02025 57 165 1,43
M24 x 3 GT1PM-NRS02430 59 164 1,31
M27 x 3 GT1PM-NRS02730 62 167 1,16
M30 x 3,5 GT1PM-NRS03035 65 170 1,01
5/8" 11un GT1P-NRS0625U11 55 169 1,57
¾" 10un GT1P-NRS0750U10 56 165 1,44
7/8" 9un GT1P-NRS0875U09 59 164 1,30
1" 8un GT1P-NRS1000U08 62 167 1,22
11/8" 8un GT1P-NRS1125U08 65 170 1,05
GT2-LCB M30 x 3,5 GT2PM-NRS03035 71 173 2,58
M33 x 3,5 GT2PM-NRS03335 74 174 2,37
M36 x 4 GT2PM-NRS03640 77 177 2,17
M39 x 4 GT2PM-NRS03940 80 180 1,93
11/8" 8un GT2P-NRS1125U08 71 173 2,64
1¼" 8un GT2P-NRS1250U08 74 174 2,42
13/8" 8un GT2P-NRS1375U08 77 177 2,20
1½" 8un GT2P-NRS1500U08 80 180 1,95
GT3-LCB M39 x 4 GT3PM-NRS03940 92 212 5,68
M42 x 4,5 GT3PM-NRS04245 96 215 5,35
M45 x 4,5 GT3PM-NRS04545 99 218 4,98
M48 x 5 GT3PM-NRS04850 105 216 4,66
M52 x 5 GT3PM-NRS05250 108 220 4,18
1½" 8un GT3P-NRS1500U08 92 212 5,71
15/8" 8un GT3P-NRS1625U08 96 215 5,32
1¾" 8un GT3P-NRS1750U08 99 218 4,95
17/8" 8un GT3P-NRS1875U08 105 216 4,59
2" 8un GT3P-NRS2000U08 108 220 4,17
GT4-LCB M52 x 5 GT4PM-NRS05250 118 240 10,74
M56 x 5,5 GT4PM-NRS05655 121 244 10,10
M60 x 5,5 GT4PM-NRS06055 124 248 9,44
M64 x 6 GT4PM-NRS06460 127 252 8,78
M68 x 6 GT4PM-NRS06860 130 256 8,09
2" 8un GT4P-NRS2000U08 118 240 10,74
2¼" 8un GT4P-NRS2250U08 121 244 9,65
2½" 8un GT4P-NRS2500U08 127 252 8,47
GT5-LCB M68 x 6 GT5PM-NRS06860 145 278 17,28
M72 x 6 GT5PM-NRS07260 149 282 16,39
M76 x 6 GT5PM-NRS07660 152 286 15,47
M80 x 6 GT5PM-NRS08060 162 293 14,55
2½" 8un GT5P-NRS2500U08 144 274 17,8
2¾" 8un GT5P-NRS2750U08 149 282 16,29
3" 8un GT5P-NRS3000U08 152 286 14,75
3¼" 8un GT5P-NRS3250U08 162 293 13,12
GT6-LCB M80 x 6 GT6PM-NRS08060 169 312 22,28
M85 x 6 GT6PM-NRS08560 169 312 21,00
M90 x 6 GT6PM-NRS09060 178 317 19,35
M95 x 6 GT6PM-NRS09560 181 322 18,04
3¼" 8un GT6P-NRS3250U08 169 312 20,71
3½" 8un GT6P-NRS3500U08 178 317 18,83
3¾" 8un GT6P-NRS3750U08 181 322 16,79

สอบถามข้อมูลเพิ่มเติม : ติดต่อ ฝ่ายขายสินค้าอุตสาหกรรม Tel 02-2358589 , 02-6349944 (info@victorysystem.com)

 

ENERPAC BSH-Series, Heavy Duty Sockets

 
  • Heavy duty impact sockets for power driven torquing equipment
  • Supplied with "Pin and Ring"
  • According ISO 2725, ISO 1174, DIN 3129, DIN 3121 or ASME-B107.2/1995

 

BSH Series Metric Sockets
3/4" Square Drive   1" Square Drive   1 1/2" Square Drive   2 1/2" Square Drive
Model Number A/F
(mm)
Model Number A/F
(mm)
Model Number A/F
(mm)
Model Number A/F
(mm)
BSH7519 19 BSH1019 19 BSH1536 36 BSH2565 65
BSH7524 24 BSH1024 24 BSH15163 41 BSH2570 70
BSH7527 27 BSH1027 27 BSH1546 46 BSH2575 75
BSH7530 30 BSH1030 30 BSH1550 50 BSH2580 80
BSH7532 32 BSH1032 32 BSH1555 55 BSH2585 85
BSH7536 36 BSH1036 36 BSH1560 60 BSH2590 90
BSH75163 41 BSH10163 41 BSH1565 65 BSH2595 95
BSH7546 46 BSH1046 46 BSH1570 70 BSH25100 100
BSH7550 50 BSH1050 50 BSH1575 75 BSH25105 105
    BSH1055 55 BSH1580 80 BSH25110 110
    BSH1060 60 BSH1585 85 BSH25115 115
    BSH1065 65 BSH1590 90 BSH25120 120
    BSH1070 70     BSH25125 125
    BSH1075 75     BSH25135 135
    BSH1080 80     BSH25140 140
    BSH1085 85     BSH25145 145
    BSH1090 90     BSH25150 150
    BSH1095 95     BSH25155 155
    BSH10100 100        
BSH Series Inch Sockets
3/4" Square Drive   1" Square Drive   1 1/2" Square Drive   2 1/2" Square Drive
Model Number A/F
(in)
Model Number A/F
(in)
Model Number A/F
(in)
Model Number A/F
(in)
BSH7519 3/4" BSH1019 3/4" BSH15163 1 5/8" BSH2565 2 9/16"
BSH7527 1 1/16" BSH1027 1 1/16" BSH1546 1 13/16" BSH2570 2 3/4"
BSH7530 1 3/16" BSH1030 1 3/16" BSH1565 2 9/16" BSH2575 2 15/16"
BSH75163 1 5/8" BSH10163 1 5/8" BSH1570 2 3/4" BSH2595 3 3/4"
BSH7546 1 13/16" BSH1046 1 13/16" BSH1575 2 15/16" BSH25100 3 15/16"
BSH75088 7/8" BSH1065 2 9/16" BSH1595 3 3/4" BSH25105 4 1/8"
BSH75094 15/16" BSH1070 2 3/4" BSH15100 3 15/16" BSH25110 4 5/16"
BSH75125 1 1/4" BSH1075 2 15/16" BSH15105 4 1/8" BSH25140 5 1/2"
BSH75131 1 5/16" BSH1095 3 3/4" BSH15110 4 5/16" BSH25150 5 7/8"
BSH7535 1 3/8" BSH10088 7/8" BSH1535 1 3/8" BSH25238 2 3/8"
BSH75144 1 7/16" BSH10094 15/16" BSH15144 1 7/16" BSH25244 2 7/16"
BSH7538 1 1/2" BSH10125 1 1/4" BSH1538 1 1/2" BSH25250 2 1/2"
BSH75156 1 9/16" BSH10131 1 5/16" BSH15156 1 9/16" BSH25263 2 5/8"
BSH7543 1 11/16" BSH1035 1 3/8" BSH1543 1 11/16" BSH25269 2 11/16"
BSH75175 1 3/4" BSH10144 1 7/16" BSH15175 1 3/4" BSH25281 2 13/16"
BSH75188 1 7/8" BSH1038 1 1/2" BSH15188 1 7/8" BSH25288 2 7/8"
BSH75194 1 15/16" BSH10156 1 9/16" BSH15194 1 15/16" BSH25300 3"
BSH75200 2" BSH1043 1 11/16" BSH15200 2" BSH25306 3 1/16"
    BSH10175 1 3/4" BSH15206 2 1/16" BSH25313 3 1/8"
    BSH10188 1 7/8" BSH15213 2 1/8" BSH25319 3 3/16"
    BSH10194 1 15/16" BSH15219 2 3/16" BSH25325 3 1/4"
    BSH10200 2" BSH15225 2 1/4" BSH25338 3 3/8"
    BSH10206 2 1/16" BSH15231 2 5/16" BSH25350 3 1/2"
    BSH10213 2 1/8" BSH15238 2 3/8" BSH25363 3 5/8"
    BSH10219 2 3/16" BSH15244 2 7/16" BSH25388 3 7/8"
    BSH10225 2 1/4" BSH15250 2 1/2" BSH25400 4"
    BSH10231 2 5/16" BSH15263 2 5/8" BSH25419 4 3/16"
    BSH10238 2 3/8" BSH15269 2 11/16" BSH25425 4 1/4"
    BSH10244 2 7/16" BSH15281 2 13/16" BSH25438 4 3/8"
    BSH10250 2 1/2" BSH15288 2 7/8" BSH25450 4 1/2"
    BSH10263 2 5/8" BSH15300 3" BSH25463 4 5/8"
    BSH10269 2 11/16" BSH15306 3 1/16" BSH25475 4 3/4"
    BSH10281 2 13/16" BSH15313 3 1/8" BSH25488 4 7/8"
    BSH10288 2 7/8" BSH15319 3 3/16" BSH25500 5"
    BSH10300 3" BSH15325 3 1/4" BSH25513 5 1/8"
    BSH10306 3 1/16" BSH15338 3 3/8" BSH25519 5 3/16"
    BSH10313 3 1/8" BSH15350 3 1/2" BSH25525 5 1/4"
    BSH10319 3 3/16" BSH15363 3 5/8" BSH25538 5 3/8"
    BSH10325 3 1/4" BSH15388 3 7/8" BSH25575 5 3/4"
    BSH10338 3 3/8" BSH15400 4" BSH25600 6"
    BSH10350 3 1/2" BSH15419 4 3/16" BSH25613 6 1/8"
    BSH10363 3 5/8" BSH15425 4 1/4"    
    BSH10388 3 7/8" BSH15438 4 3/8"    
        BSH15450 4 1/2"    
        BSH15463 4 5/8"  

สอบถามข้อมูลเพิ่มเติม : ติดต่อ ฝ่ายขายสินค้าอุตสาหกรรม Tel 02-2358589 , 02-6349944 (info@victorysystem.com)

 

ENERPAC HT, B-Series, Accessories for Bolt Tensioners and Pumps

 
  • Enerpac bolt tensioner and pump accessories include hoses and quick disconnect couplers for tensioning tools and pumps
  • 1500 bar maximum operating pressure.
Quick Disconnect Coupler * Quick Disconnect Coupler with Adaptor Kit *
Complete Set
Quick Disconnect Blanking Coupler Set *
Complete Female Male
Set Half Half
B150 BR150 BH150 BW150AW B150B

Hoses Model Number Maximum Pressure Hose Length End 1 End 2
(bar) (metres)
HT-1503 1500 1,0 1/4 BSPM 120˚ Cone 1/4 BSPM 120˚ Cone
HT-1510 1500 3,0 1/4 BSPM 120˚ Cone 1/4 BSPM 120˚ Cone
HT-1503HR * 1500 1,0 BH150 BR150
HT-1510HR * 1500 3,0 BH150 BR150

* includes dust caps

 

HAD Series  ALLEN DRIVE 

HI-POWER ALLEN DRIVE 

 
 
 
 
 
 
 

Hi-Quality Professional  ALLEN DRIVE FOR HYDRAULIC TORQUE WRENCH

HYDRAULIC TORQUE WRENCH  SQUARE DRIVE 

OPTIONAL ALLEN DRIVES  METRIC

 

HEXAGON SIZE (mm.)
ALLEN DRIVE MODEL
 

Square Drive 3/4"  (Suit to KU-1)

Hex. size 14 mm.
 HAD1-14
 
Hex. size 17 mm.
 HAD1-17
 
Hex. size 19 mm.
 HAD1-19
 
Hex. size 22 mm.
 HAD1-22
 
Hex. size 24 mm.
 HAD1-24
 
Square Drive  1"  (Suit to KU-3)
Hex. size 17 mm.
 HAD3-17
 
Hex. size 19 mm.
 HAD3-19
 
Hex. size 22 mm.
 HAD3-22
 
HI-POWER  ALLEN DRIVES HAD Series
Hex. size 24 mm.
 HAD3-24
 
Square Drive Range :
Hex. size 27 mm.
 HAD3-27
 
Hex. size 30 mm.
 HAD3-30
 
3/4 - 2 1/2 inch
Hex. size 32 mm.
 HAD3-32
 

Square Drive 1 1/2"  (Suit to KU-5)

Hex. size 17 mm.
 HAD5-17
 
Hex. size 19 mm.
 HAD5-19
 
Hexagon Allen Drive
Hex. size 22 mm.
 HAD5-22
 
Hex. size 24 mm.
 HAD5-24
 
14 - 85 mm.
Hex. size 27 mm.
 HAD5-27
 
Hex. size 30 mm.
 HAD5-30

 
Hex. size 32 mm.
 HAD5-32
 

Square Drive 1 1/2"  (Suit to KU-8)

Hex. size 30 mm.
 HAD8-30
 
Hex. size 32 mm.
 HAD8-32
 
Hex. size 36 mm.
 HAD8-36
 
Hex. size 41 mm.
 HAD8-41
 
Hex. size 46 mm.
 HAD8-46
 

Square Drive 1 1/2"  (Suit to KU-10)

Hex. size 30 mm.
 HAD10-30
 
Hex. size 32 mm.
 HAD10-32
 
Hex. size 36 mm.
 HAD10-36
 
Hex. size 41 mm.
 HAD10-41
 

HI-POWER  HI-QUALITY  HYDRAULIC

Hex. size 46 mm.
 HAD10-46
 

For more information :

Square Drive 2 1/2"  (Suit to KU-20)

Hex. size 36 mm.
 HAD20-36
 
Contact to
Hex. size 41 mm.
 HAD20-41
 

PS VictorySystem Enterprise Ltd.

Hex. size 46 mm.
 HAD20-46
 

5/4 Decho Road, Suriwong,

Hex. size 50 mm.
 HAD20-50
 

Bangrak , Bangkok Thailand

Hex. size 55 mm.
 HAD20-55
 
 
 
Hex. size 60 mm.
 HAD20-60
 

Tel. 02-2358589 , 02-6349944

Hex. size 65 mm.
 HAD20-65
 
Fax. 02-2358590
Hex. size 70 mm.
 HAD20-70
 

e-mail : info@victorysystem.com

Hex. size 75 mm.
 HAD20-75
 

www.VictorySystem.com

Hex. size 85 mm.
 HAD20-85
 
 
 

* Consider suitable torque for each hex.nut size as torque wrench's spec.*

 

 

 

 

สอบถามข้อมูลเพิ่มเติม : ติดต่อ ฝ่ายขายสินค้าอุตสาหกรรม Tel 02-2358589 , 02-6349944 (info@victorysystem.com)

 

 

 







Copyright © 2010 All Rights Reserved.
World of Industrial & Factory Machinery Parts & Hydraulic Equipment for all Industries. HI-POWER HYDRAULIC CENTER , Hi-Quality Professional Hydraulic 1 tons upto 100- 500 - 1000 tons Tools P S VICTORY SYSTEM ENTERPRISE CO.LTD. Head Office บริษัท พี เอส วิคตอรี่ ซิสเต็ม เอ็นเตอร์ไพรส์ จำกัด สำนักงานใหญ่ 5/4 ถนนเดโช แขวงสุริยวงศ์ เขตบางรัก กรุงเทพ 10500 ประเทศไทย 5/4 Decho Road, Suriyawong , Bangrak , Bangkok 10500 Thailand Tel 02-634-9944 , 02-235-8589 Fax 02-235-8590 e-mail address: info@VictorySystem.com