ReadyPlanet.com
dot dot dot
dot
SUPER SEARCH ค้นหาสินค้า

dot
dot
ALL INDUSTRIAL EQUIPMENTS
dot
bulletAutomation & Machinery
bulletHIPOWER ULTRA Cylinder 100 tons 150 tons 200 tons 300 tons
dot
HYDRAULIC HI-POWER 700 Bar ระบบไฮดรอลิคทุกอุตสาหกรรม
dot
bulletHI-POWER #RSM
bulletHydraulic HI POWER 700 BAR
bulletHI-POWER #RCS
bulletHI-POWER #RC Cylinder
bulletHI-POWER #RCH Cylinder
bulletHI-POWER #CLL Lock Nut
bulletHI-POWER #CLSG
bulletHI-POWER #CLP Lock Nut
bulletHI-POWER #C Cylinder
bulletHI-POWER #H Cylinder
bulletHI-POWER #RR D/A Cylinder
bulletHIPOWER #RRH D/A Hollow
bulletHI-POWER #HPATG-1102N
bulletHI-POWER #RARH
bulletHI-POWER #CLRG Double Acting
bulletHYDRAULIC HI-POWER SERVICE CENTER ศูนย์บริการ และ จำหน่าย ระบบไฮดรอลิค อุตสาหกรรมหนัก
bulletHydraulic System Set-up
bulletHI-POWER #FZ Fitting700Bar
dot
ENERPAC HYDRAULIC TOOLS
dot
bulletENERPAC CYLINDER
bulletENERPAC HAND PUMP 700 Bar
bulletENERPAC ELECTRIC PUMP
bulletENERPAC AIR HYD. PUMP
bulletENERPAC TORQUE WRENCH
bulletENERPAC HYD.PULLER
bulletENERPAC VALVE 10000 psi
bulletENERPAC HOSE & FITTINGS
bulletENERPAC Hyd.PressureGauge
bulletENERPAC SYS.COMPONENTS
bulletENERPAC HYD. PRESSES H - Frame Press , Roll Frame Press
dot
HI-POWER HYDRAULIC TOOLS
dot
bulletHI-POWER CYLINDER
bulletHIPOWER Cylinder RC Series
bulletHI-POWER HAND PUMP 700BAR
bulletHI-POWER TORQUE WRENCH ประแจไฮดรอลิค อุตสาหกรรมหนัก
bulletHI-POWER HW SLIM TORQUE WRENCH
bulletHI-POWER HS SQD TORQUE WRENCH
bulletHI-POWER ELECTRIC PUMP > Cylinder > Torque wrench Pump
bulletHI-POWER HOSE
bulletHI-POWER HYD.COMPONENTS
dot
HI-POWER PULLER & PUMP
dot
bulletHIPOWER เหล็กดูด3ขา PM
bulletHI-POWER เหล็กดูด 3 ขา PME
bulletHI-POWER เหล็กดูด 3 ขา PRE
bulletHIPOWER เหล็กดูด 3 ขา PR
bullet็HIPOWER จานกลมดูดลูกปืน ดึงแบริ่ง
bulletHI-POWER Cylinder 700Bar
bulletHI-POWER HANDPUMP700Bar
bulletHYD.PULLER ชุดเหล็กดูด 3 ขา 2/3 ขา เหล็กดูดมู่เล่ย์ ชุดถอด แบริ่งชุดถอดพู่เล่ย์ จานเหล็กดูดแบริ่ง
bulletHI-POWER Pump.Air/Electric Pump.Foot Pump
bulletHI-POWER HOSE
bulletHI-POWER VALVE 10000psi
dot
HIPOWER PLUS 2800 BAR
dot
dot
HIPOWER PLUS 1500 BAR
dot
bulletHIPOWER HBT BOLT TENSION
dot
HI-POWER PLUS ULTRA
dot
dot
HIPOWER PLUS 1000 BAR
dot
bulletฺBOTTLE JACK แม่แรงกระปุก
bulletMACHINE ROLLER LOAD SKATES ล้อแม่แรงเคลื่อนย้ายเครื่องจักร ตัวเต่าลากในงานอุตสาหกกรรมหนัก ตัวเต่า แมชชีนโรลเลอร์ 1 ตัน - 10 ตัน
bulletHI-POWER AUTOMATIC GREASE/OIL LUBRICATOR กระปุกอัดเติมจารบีอัตโนมัติ/กระปุกน้้ำมันหล่อลื่นอัตโนมัติ เพื่อเครื่องจักรทุกประเภท
bulletHI-POWER Bearing Fitting Tools ชุดตอกแบริ่ง ไฮ-พาวเวอร์
dot
KUDOS HYDRAULIC TOOLS
dot
bulletKUDOS Hyd.Crimpers Head คีมย้ำหางปลา คีมย้ำหัวสาย ชุดปั๊มมือโยกครบชุด
bulletKUDOS Hyd.Crimpers คีมย้ำหางปลา ย้ำหัวสายไฮดรอลิกในตัวคีมย้ำ
bulletKUDOS Hex.Dies ดายหกเหลี่ยม หัวหกเหลี่ยม คีมย้ำหางปลา CU,AHE,HYCP,UCP
bulletKUDOS CUTTER HEAD คีมตัดสายไฟฟ้า ไฮดรอลิกแรงตัดสูง สายเคเิบิล ลวดเหล็กกล้า ตัดโลหะ ชุดปั๊มมือโยก
bulletKUDOS HYD.CUTTER เครื่องตัดสาย/ลวดสลิง ไฮดรอลิกในตัว
bulletKUDOS NUT SPLITTERS เครื่องตัดหัวน็อตไฮดรอลิค
bulletKUDOS NUT SPLITTERS เครื่องตัดหัวน็อตไฮดรอลิค
bulletKUDOS PUNCHERS & BENDERS เครื่องเจาะรูแผ่นเหล็ก สแตนเลส น๊อคเอ้าท์ไฮดรอลิก
bulletKUDOS BATTERY CRIMPER LEC
bulletKUDOS BATTERY CRIMPER K
bulletKUDOS BATTERY CUTTER LEC
bulletKUDOS BATTERY CUTTER KCV & K
bulletKUDOS HAND TOOLS
dot
HIPOWER MACHINE ROLLER
dot
bulletTOE JACK แม่แรงยกข้าง&ยกบน
bulletMachine Roller HW Series
bulletHIIPOWER MACHINE LIFTING MHL
bulletHIPOWER CROWBAR ด้ามงัด 3 ตัน 5 ตัน
dot
INDUSTRIAL FACTORY MACHINERY TOOLS & INSTRUMENTS
dot
dot
DYNISCO ( U.S.A )
dot
bulletDYNISCO Transducers Transmitter & Digital Pressure Indicator
bulletDYNISCO Pressure Indicator
bulletDYNISCO CABLE&CONNECTOR
dot
MANOSTAR
dot
bulletMANOSTAR WO81 Series: WO81FN WO81FS WO81FT
bulletManostar WO81FN
bulletManostar WO81FS
bulletManostar WO81FT
bulletManostar WO81PC
bulletManostar WO81PR
bulletManostar WO71 F (#WO70FV)
bulletManostar WO71PV (#WO70PV)
bulletManostar Pressure Switch MS61A
dot
SUGINO
dot
bulletSUGINO Hydro Speed Regulator RB , R series
bulletSUGINO RB2430 RB2460
bulletSUGINO Hydro Speed Regulator R-A series
dot
MUTOH DIGICOLLAR (Mutoh Engineering Japan)
dot
bulletMutoh Linear Encoder D-1000Z
bulletMUTOH D-1000Z-C
bulletMUTOH D-1000Z-V
bulletMUTOH D-1000Z-E
bulletMUTOH DE-04-C
bulletMUTOH DE-04-E
bulletMUTOH DL-07-C
bulletMutoh Rotary Encoder S
bulletMutoh Rotary Encoder A
bulletMutoh Rotary Encoder C
bulletMutoh Rotary Encoder O
bulletMutoh Rotary Encoder UN
bulletMutoh Digital Counter KPS
bulletMutoh Digital Counter SPS
bulletDigicollarDigital Measure
bulletMUTOH DIGICOLLAR All Models
bulletMUTOH Accesories
dot
POWER CONTROL GEAR MOTOR / PUMP & MOTOR
dot
dot
NIPPON OIL PUMP
dot
bulletNOP Trochoid Pump
bulletTrochoid Pump Flow Small Pump
bulletTOP-1A ,TOP-1MA,TOP-1HG
bulletTOP-2 HB series
bulletTOP-2MY , TOP-2MW Pump w/ Motor
bulletTOP-2HWM , TOP-2HWMVB
bulletTOP-N320HVB N330HVB N340HVB N350HVB
bulletTOP-N320H N330H N340H N350H
bulletTrochoid Pump Flow 116 - 586 litre/min TOP-4S,TOP-4AMVB,TOP-4A,GPL,TOP-4MBY
bulletReversible Pump ปั๊มหมุนกลับได้ 2RA,3RD
bulletFuel Pump ปั๊มน้ำมันเชื้อเพลิง GFS,GF,GFK,GFL,GFH,GD,GFM
bulletNOP Filtration Pump ปั๊มกรองไมโครท็อป
bulletNOP Relief Valve, TOP-2VB,TOP-VBD
bulletNOP Coupling คับปลิ้ง
bulletNippon Oil Pump Japan Reduction Gear GPS-1 , GRS-6 ,GRS-2
bulletOrbmark Motor & White Hyd.Motor
dot
SAGINOMIYA
dot
bulletPressure Control SNS HNS
dot
KORNYLAK TRANSWHEELS ใช้ในงานลำเลียง งานคอนเวเยอร์
dot
bulletTranswheel
bulletSaginomiya Pressure Controls & Sensors
bulletTEMP.& HUMIDITY CONTROL
bulletEXPANSION VALVES
bulletSaginomiya Digital Thermostats ULE & FLE
bulletSaginomiya Flow Control
bulletKornylak Transwheels
bulletSUPER TRANSWHEEL
dot
SUMITOMO GEAR MOTOR
dot
bulletSumitomo CYCLO DRIVE GEAR MOTOR
bulletSumitomo CYCLO DRIVE Gear Motor CNVM , CVVM
bulletSUMITOMO CYCLO DRIVE CNH,CHH,CNV,CVV Gear Reducer
bulletHYPONIC DRIVE Gear motor
bulletSUMITOMO INVERTER
bulletSUMITOMO ASTERO
bulletSUMITOMO ALTAX Gear
bulletSUMITOMO BEIER VARIATOR
dot
ENOMOTO MICRO PUMP
dot
bulletENOMOTO MICRO PUMP
bulletSUMITOMO BUDDY BOX Gear
bulletSUMITOMO PREST Gearmotor
bulletLevel Indicator
dot
Gefran
dot
bulletBrake & Clutch
bulletGreared Motor
bulletMotor
bulletRelief Value
bulletBrake & Clutch
bulletMotor
bulletDirectional Value
bulletDisc Brake
bulletInternal Gear Pump
dot
SUNTES
dot
bulletAir Hydraulic Booster
bulletFoot Pedal Unit
bulletHydraulic Disc Brake
bulletMechanical Disc Brake
bulletMini Caliper & Mini Disc
bulletPad
bulletPneumatic Disc Brake
bulletPosition Clamper
bulletPower Control System
bulletSA Electromagnetic Disc Brake
bulletSA Hydraulic Disc Brake
bulletSA Pneumatic Disc Brake
bulletPressure Switch
bulletElectric Cylinder
bulletRAMPAC Hyd. Cylinder
bulletHYDRAULIC HI-POWER 700 BAR / 10000 psi
bulletPOWERTEAM USA HYD.
bulletSKF BEARING FITTNG TOOLS ชุดตอกแบริ่ง SKF
bulletALLEN DRIVE TORQUE WRENCH
bulletIndustrial Product Brand - C
bulletIndustrial Product Brand - F
dot
NIPPON MAGNETIC HAMMER ,Japan
dot
bulletNNI MAGNETIC HAMMER SIC
bulletNMI MagHammer SIC-0.5A
bulletNMI MagHammer SIC-1A
bulletNMI MagHammer SIC-2A
bulletMagHammer SIC-0.5AS
bulletMagHammer SIC-1AS
bulletMagHammer SIC-2AS
bulletMagHammer SIC-3AS
bulletNMI Controller SB-1A
bulletNMI Controller SB-2A
bulletNMI Controller SN-1A
bulletNMI Controller SN-2A
bulletPressure Switch
dot
WORLD Inter-Industrial FactoryTechno Fair & Exhibition 2013
dot
bulletPUMPS : Hand Pump , Foot Pump , Electric Pump , Air Hydraulic Pump
bulletMutoh Rotary Encoder UN
bulletHI-POWER #CLG




dot
KUDOS BATTERY CRIMPER LEC

  KUDOS BATTERY OPERATED TOOLS / CRIMPER  BATTERY TYPE

สุดยอดคีมย้ำหางปลา ย้ำสายไฟฟ้า อัตโนมัติ ทรงพลัง มีแบตเตอร์รี่ในตัว ใช้ง่าย ทุกรุ่นพร้อมแท่นชาร์จในชุด
รุ่นใหม่ล่าสุดทุกรุ่น ราคาถูกกว่าเดิม  เทคโนโลยีทันสมัยกว่า พกพาสะดวก รวดเร็ว ทรงประสิทธิภาพ

#Kudos LEC-44T


KUDOS HYD. BATTERY LCE-44T
Youtube from Kudostools.com

KuDos-Battery-LEC-44T.jpg

CONTACT US

#KUDOS LEC-44T
KUDOS #LEC44T Height : 363 mm
KUDOS #LEC44T Weight : 6.7 kgs (w/o battery )
KUDOS #LEC44T Specifications :
KUDOS #
LEC44T Drive unit : 18 V DC motor
KUDOS #LEC44T Charger (GS/CE) :
KUDOS #
LEC44T Input voltage : 220V single phase AC  
KUDOS #
LEC44T Input frequency : 50~60Hz
KUDOS #
LEC44T Input current : 21.75 VA
KUDOS #
LEC44T Reservoir capacity : 120 cc
KUDOS #
LEC44T Insulated cap should be ordered separately.
KUDOS #
LEC44T Crimp capacity :
KUDOS #LEC44T Jaw opening : 44 mm
KUDOS #LEC44T-Max pressure : 700 bar
KUDOS #LEC44T Crimping force : 14.01 tons / 124.6 kN
KUDOS #LEC44T Main application : up to 400mm² CU
KUDOS #
LEC44T Dies sold separately
KUDOS #LEC-44T Accepts all dies used by Alcoa, Burndy, T&B, Klauke, Cembre and Blackburn 12 ton U-type dies.
KUDOS #LEC44T Suitable for terminals with wall thickness little less than DIN 46235 cable lugs.

 

Back to top

 


#Kudos LEC-40T
 


KUDOS HYD. BATTERY LEC-40T
Youtube from Kudostools.com

KuDos-Battery-LEC-40T.jpg

CONTACT US

#KUDOS LEC-40T
KUDOS #LEC40T Height : 389 mm
KUDOS #LEC40T Weight : 6.2 kgs (w/o battery )
KUDOS #LEC40T Specifications :
KUDOS #
LEC40T Drive unit : 18 V DC motor
KUDOS #LEC40T Charger (GS/CE) :
KUDOS #
LEC40T Input voltage : 220V single phase AC  
KUDOS #
LEC40T Input frequency : 50~60Hz
KUDOS #
LEC40T Input current : 21.75 VA
KUDOS #
LEC40T Reservoir capacity : 120 cc
KUDOS #
LEC40T Insulated cap should be ordered separately.
KUDOS #
LEC40T Crimp capacity :
KUDOS #LEC40T Jaw opening : 40 mm
KUDOS #LEC40T-Max pressure : 700 bar
KUDOS #LEC40T Crimping force : 14.01 tons / 124.6 kN
KUDOS #LEC40T Main application : up to 400mm² CU
KUDOS #
LEC40T Dies sold separately
KUDOS #LEC-40T Accepts all dies used by Alcoa, Burndy, T&B, Klauke, Cembre and Blackburn 12 ton U-type dies.
KUDOS #LEC-40T Suitable for terminals with wall thickness little less than DIN 46235 cable lugs.

Back to top


#Kudos LEC-32T
 


KUDOS HYD. BATTERY LCE-32T
Youtube from Kudostools.com

KuDos-Battery-LEC-32T.jpg

CONTACT US

#KUDOS LEC-32T
KUDOS #LEC-32T Height : 385 mm
KUDOS #LEC-32T Weight : 6.0 kgs (
w/o battery )
KUDOS #LEC-32T Specifications :
KUDOS #LEC-32T Drive unit : 18V DC motor
KUDOS #LEC-32T Charger (GS/CE) :
KUDOS #LEC-32T Input voltage : 220V single phase AC
KUDOS #LEC-32T Input frequency : 50~60Hz
KUDOS #LEC-32T Input current : 21.75VA
KUDOS #LEC-32T Reservoir capacity : 120 cc
KUDOS #LEC-32T Insulated cap should be ordered separately
KUDOS #LEC-32T Crimp capacity :
KUDOS #LEC-32T Jaw opening : 32 mm
KUDOS #LEC-32T Crimping force : 14.01 tons / 124.6 kN
KUDOS #LEC-32T Main application : up to 400mm² CU
KUDOS #LEC-32T Dies sold separately
KUDOS #LEC-32T Accepts all dies used by Alcoa, Burndy, T&B, Klauke, Cembre and Blackburn 12 ton U-type dies.
KUDOS #LEC-32T Suitable for terminals with wall thickness little less than DIN 46235 cable lugs.

Back to top


#Kudos LEC-6


KUDOS HYD. BATTERY LCE-6
Youtube from Kudostools.com

KuDos-Battery-LEC-6.jpg

CONTACT US

#KUDOS LEC-6
KUDOS #LEC-6 Height : 386 mm
KUDOS 
#LEC-6 Weight : 5.5 kgs (w/o battery )
KUDOS #LEC-6 Specifications :
KUDOS 
#LEC-6 Drive unit : 18V DC motor
KUDOS #LEC-6 Charger (GS/CE) :
KUDOS 
#LEC-6 Input voltage : 220V single phase AC
KUDOS 
#LEC-6 Input frequency : 50~60Hz
KUDOS 
#LEC-6 Input current : 21.75 VA
KUDOS 
#LEC-6 Reservoir capacity : 120 cc
KUDOS #LEC-6 Crimp capacity :
KUDOS 
#LEC-6 Jaw opening : 36 mm
KUDOS 
#LEC-6 Crimping force : 7.03 tons / 62.5 kN
KUDOS 
#LEC-6 Main application : Anderson type connectors up to 500 MCM

KUDOS #LEC-6 Features :

KUDOS #LEC-6 360˚ rotating head for convenient operation.

KUDOS #LEC-6 Dieless compression to crimp Anderson style connectors up to 500 MCM

Back to top


#Kudos LEC-6FT


KUDOS HYD. BATTERY LEC-6FT
Youtube from Kudostools.com

KuDos-Battery-LEC-6FT.jpg

CONTACT US                                       

#KUDOS LEC-6FT
KUDOS #LEC-6FT Length : 400 mm
KUDOS 
#LEC-6FT Weight : 5.7 kgs(w/o battery) 
KUDOS #LEC-6FT Specifications :
KUDOS 
#LEC-6FT Drive unit : 18V DC motor
KUDOS 
#LEC-6FT Charger (GS/CE) :
KUDOS 
#LEC-6FT Input voltage : 220V single phase AC
KUDOS 
#LEC-6FT Input frequency : 50~60 Hz
KUDOS 
#LEC-6FT Reservoir capacity : 120cc
KUDOS 
#LEC-6FT Crimping Capacity :
KUDOS 
#LEC-6FT Max pressure : 700 bar
KUDOS 
#LEC-6FT Jaw opening : 38 mm
KUDOS #LEC-32T Crimping force : 7.03 tons / 62.5 kN
KUDOS #LEC-32T Main application : Anderson type connectors up to 750 MCM
KUDOS #LEC-6 Features :

KUDOS #LEC-6 360˚ rotating head for convenient operation.

KUDOS #LEC-6 Dieless compression to crimp Anderson style connectors up to 750 MCM

 

Back to top

Back to top


#Kudos LEC-45X(Related heads)


 


KUDOS HYD. BATTERY LEC-45X
Youtube from Kudostools.com

KuDos-Battery-LEC-45X.jpg

KuDos-Catalogu-project_High_Page_036.jpg

CONTACT US

#KUDOS LEC-45X
KUDOS 
#LEC-45X Weight : 4.7 kgs (w/o battery, w/o any head)
KUDOS 
#LEC-45X  Specifications :
KUDOS 
#LEC-45X Drive unit : 18V DC motor
KUDOS 
#LEC-45X  Charger (GS/CE) :
KUDOS 
#LEC-45X Input voltage : 220V single phase AC
KUDOS 
#LEC-45X Input frequency : 50~60 Hz
KUDOS 
#LEC-45X Reservoir capacity : 120 cc
KUDOS 
#LEC-45X  Crimping Capacity :
KUDOS 
#LEC-45X can be transformed with 6 different adapter heads as cable cutter, puncher, crimper, bus bar cutter, nut splitter, puncher.
KUDOS 
#LEC-45X Max pressure  700 bar
KUDOS 
#LEC-45X Max output : 14.01 tons / 124.6 kN
KUDOS #LEC-45X Ram stroke : 44 mm 

KUDOS #LEC-45X 6 adapter heads are sold separately.

#KUDOS 44AT-HEX,หัวบีบหลอดสายไฟ,หัวคีมย้ำหางปลา
KUDOS 
#LEC44X,44AT-HEX (Hex. Crimping Head Adapter)
44AT-HEX Main Application : 10-400 mm2  

44AT-HEX Die sold separately : CU16, CU25, CU35, CU50, CU70, CU95, CU120, CU150, CU185, CU240, CU300, CU400 mm

44AT-HEX Accept all 12 tons die sets

#KUDOS 44AT-50AP,หัวเจาะน็อคเอาท์

KUDOS #LEC44X,44AT-50AP (Panel Punching Head Adapter)
44AT-50AP Punching Capacity :

44AT-50AP Mild Steel Panel thickness : 7 mm / Dia : 17.5 mm

44AT-50AP Copper Panel thickness : 7 mm / Dia : 20.5 mm

44AT-50AP Included Round Punching Die Sets :10.5, 13.5, 17.5, 20.5 mm each set for mild steel.

44AT-50AP **Die sets for copper panel separately.

#KUDOS 44AT-NC36, หัวชาร์ตน็อตไฮดรอลิก

 

KUDOS #LEC44X,44AT-NC36 (Nut Splitter Head Adapter)

44AT-NC36 Bolt Range : M10~ M24

44AT-NC36 Hex. Nut Range : 16~ 36 mm

#KUDOS 44AT-50AC, หัวตัดเหล็กฉาก

KUDOS #LEC44X,44AT-50AC (Angle Steel Cutter Head Adapter)

44AT-50AC Max. Width : 50 mm

44AT-50AC Max. Thickness : 6 mm

#KUDOS 44AT-SC40, หัวคีมตัดสายไฟไฮดรอลิก

KUDOS #LEC44X,44AT-SC40 (Cable Cutter Head Adapter)

 

44AT-SC40 Cutting Capacity 

44AT-SC40 ACSR : 40 mm

44AT-SC40 Copper : 44 mm

#KUDOS 44AP-MM36, หัวตัดน็อต

KUDOS #LEC44X,44AP-MM36 (Nut Spitting Head) 

KUDOS #LEC44X,44AP-MM36 Bolt Range : M10~ M26 mm

KUDOS #LEC44X,44AP-MM36 Hex. Nut Range : 36 mm

Back to top


#Kudos LEC-185T 


KUDOS HYD. BATTERY LEC-185T
Youtube from Kudostools.com

KuDos-Battery-LEC-185T.jpg

CONTACT US

 

#KUDOS LEC-185T
KUDOS #LEC-185T Height : 310 mm
KUDOS 
#LEC-185T Weight : 3.9 kgs (w/o battery)
KUDOS #LEC-185T Specifications :
KUDOS 
#LEC-185T Drive unit : 18V DC motor
KUDOS 
#LEC-185T Charger (GS/CE) :
KUDOS 
#LEC-185T Input voltage : 220V single phase AC
KUDOS 
#LEC-185T Input frequency : 50~60 Hz
KUDOS 
#LEC-185T Input current : 21.75 VA
KUDOS 
#LEC-185T Reservoir capacity : 120 cc
KUDOS 
#LEC-185T Crimping Capacity :
KUDOS 
#LEC-185T Max pressure : 460 bar
KUDOS 
#LEC-185T Max output : 5.77 tons / 51.3 kN
KUDOS 
#LEC-185T Max compression : 185 mm²
KUDOS 
#LEC-185T Accepts BEKU type dies.
KUDOS 
#LEC-185T Stock dies are for DIN46235 terminals
KUDOS 
#LEC-185T Dies sold separately(AHE 1016/2535/5070/95120/150/185)

Back to top

 

#Kudos LEC-240TR


KUDOS HYD. BATTERY LEC-240TR
Youtube from Kudostools.com

KuDos-Battery-LEC-240TR.jpg

CONTACT US

#KUDOS LEC-240TR
KUDOS #LEC-240TR Height : 360 mm
KUDOS 
#LEC-240TR Weight : 4.1 kgs (w/o battery)
KUDOS #LEC-240TR Specifications :
KUDOS 
#LEC-240TR Drive unit : 18V DC motor
KUDOS 
#LEC-240TR Charger (GS/CE) :
KUDOS 
#LEC-240TR Input voltage : 220V single phase AC
KUDOS 
#LEC-240TR Input frequency : 50~60 Hz
KUDOS 
#LEC-240TR  Input current : 21.75 VA
KUDOS 
#LEC-240TR Reservoir capacity : 120 cc
KUDOS 
#LEC-240TR Crimping Capacity :
KUDOS 
#LEC-240TR Max pressure  550 bar
KUDOS 
#LEC-240TR Max output : 6.90 tons / 61.4 kN
KUDOS 
#LEC-240TR Max compression : 240 mm²

KUDOS #LEC-240TR Accepts BEKU type dies.

KUDOS #LEC-240TR Stock dies are for DIN46235 terminals
KUDOS 
#LEC-240TR Dies sold separately(AHE 1016/2535/5070/95120/150/185/240)

Back to top

 


#Kudos LEC-300


KUDOS HYD. BATTERY LEC-300
Youtube from Kudostools.com

KuDos-Battery-LEC-300.jpg

CONTACT US

#KUDOS LEC-300
KUDOS #LEC-300 Height : 327 mm
KUDOS 
#LEC-300 Weight : 4.6 kgs (w/o battery)
KUDOS #LEC-300 Specification :
KUDOS 
#LEC-300 Drive unit : 18V DC motor
KUDOS 
#LEC-300 Charger (GS/CE) :
KUDOS 
#LEC-300 Input voltage : 220V single phase AC
KUDOS 
#LEC-300 Input frequency : 50~60Hz
KUDOS 
#LEC-300 Input current : 21.75 VA
KUDOS 
#LEC-300 Reservoir capacity : 120 cc
KUDOS 
#LEC-300 Crimp capacity :
KUDOS 
#LEC-300 Max pressure  550 bar
KUDOS 
#LEC-300 Crimping force : 6.90 tons / 61.4 kN
KUDOS 
#LEC-300 Max compression : 300 mm² 
KUDOS 
#LEC-300 Dies sold separately(T16/25/35/50/70/95/120/150/185/240/300)

 

Back to top


#Kudos LEC-U27


KUDOS HYD. BATTERY LEC-U27
Youtube from Kudostools.com

KuDos-Battery-LEC-U27.jpg

CONTACT US

#KUDOS LEC-U27
KUDOS #LEC-U27 Height  : 323 mm
KUDOS 
#LEC-U27 Weight : 6.1 kgs (w/o battery)
KUDOS #LEC-U27 Specifications :
KUDOS 
#LEC-U27 Drive unit : 18V DC motor
KUDOS 
#LEC-U27 Charger (GS/CE) :
KUDOS 
#LEC-U27 Input voltage : 220V single phase AC
KUDOS 
#LEC-U27 Input frequency : 50~60Hz
KUDOS 
#LEC-U27 Input current : 21.75VA
KUDOS 
#LEC-U27 Reservoir capacity : 120 cc
KUDOS 
#LEC-U27 Crimp capacity :
KUDOS 
#LEC-U27 U-Type Head
KUDOS 
#LEC-U27 Max pressure : 460 bar
KUDOS 
#LEC-U27 Crimping force 14.01 tons / 124.6 kN
KUDOS 
#LEC-U27 Main application : 
KUDOS #LEC-U27 L.V. lugs & splices : 400 mm²

KUDOS #LEC-U27 Insulated terminals : 240 mm²
KUDOS #LEC-U27 C sleeve connector : 185 mm²
KUDOS #LEC-U27 H.V. lugs & splices : 400 mm²
KUDOS #LEC-U27 Al lugs & splices : 300 mm²

KUDOS #LEC-U27 Dies sold separately

Back to top


#Kudos LEC-150


KUDOS HYD. BATTERY LEC-150
Youtube from Kudostools.com

KuDos-Battery-LEC-150.jpg

CONTACT US

#KUDOS LEC-150
KUDOS #LEC-150 Height : 354 mm
KUDOS 
#LEC-150 Weight : 4.7 kgs (w/o battery)
KUDOS #LEC-150 Specifications :
KUDOS 
#LEC-150 Drive unit : 18V DC motor
KUDOS 
#LEC-150 Charger (GS/CE) :
KUDOS 
#LEC-150 Input voltage : 220V single phase AC
KUDOS 
#LEC-150 Input frequency : 50~60Hz
KUDOS 
#LEC-150 Input current : 21.75 VA
KUDOS 
#LEC-150 Reservoir capacity : 120 cc
KUDOS #LEC-150 Crimp capacity :
KUDOS 
#LEC-150 Max pressure : 700 bar
KUDOS 
#LEC-150 Crimping force :14.01 tons / 124.6 kN
KUDOS 
#LEC-150 Main application : up to 150mm² CU

Back to top

 

#Kudos LEC-U240


KUDOS HYD. BATTERY LEC-U240
Youtube from Kudostools.com

KuDos-Battery-LEC-U240.jpg

CONTACT US

#KUDOS LEC-U240
KUDOS #LEC-U240 Height : 380 mm
KUDOS 
#LEC-U240 Weight : 4.1 kgs (w/o battery)
KUDOS #LEC-U240 Specifications :
KUDOS 
#LEC-U240 Drive unit : 18V DC motor
KUDOS 
#LEC-U240 Charger (GS/CE) :
KUDOS 
#LEC-U240 Input voltage : 220V single phase AC
KUDOS 
#LEC-U240 Input frequency : 50~60Hz
KUDOS 
#LEC-U240 Input current : 21.75 VA
KUDOS 
#LEC-U240 Reservoir capacity : 120 cc
KUDOS #LEC-U240 Crimp capacity :
KUDOS 
#LEC-U240 Max pressure : 700 bar
KUDOS 
#LEC-U240 Max output : 9.73 tons / 86.6 kN
KUDOS 
#LEC-U240 Ram stroke : 14.5 mm
KUDOS 
#LEC-U240 Accepts BEKU type dies
KUDOS 
#LEC-U240 Hex. crimping : 10-240 mm²
KUDOS 
#LEC-U240 Cu sleeves & lugs NFC 20. 130 : 10 to 240 mm²
KUDOS #LEC-U240 Cu or Al bare or insulated sleeve : E54 to 230

KUDOS #LEC-U240 Cu or Al sleeves & lugs DIN 48083 : KZ6 to KZ25

KUDOS #LEC-U240 Pre-rounding : 35 to 240 mm²

KUDOS #LEC-U240 Dies sold separately

KUDOS #LEC-U240 Accepts all dies used by Alcoa, Burndy, T&B, Klauke, Cembre and Blackburn 12 ton U-type dies.

KUDOS #LEC-U240 Suitable for terminals with wall thickness little less than DIN 46235 cable lugs.

Back to top

 


 







Copyright © 2010 All Rights Reserved.
World of Industrial & Factory Machinery Parts & Hydraulic Equipment for all Industries. HI-POWER HYDRAULIC CENTER , Hi-Quality Professional Hydraulic 1 tons upto 100- 500 - 1000 tons Tools P S VICTORY SYSTEM ENTERPRISE CO.LTD. Head Office บริษัท พี เอส วิคตอรี่ ซิสเต็ม เอ็นเตอร์ไพรส์ จำกัด สำนักงานใหญ่ 5/4 ถนนเดโช แขวงสุริยวงศ์ เขตบางรัก กรุงเทพ 10500 ประเทศไทย 5/4 Decho Road, Suriyawong , Bangrak , Bangkok 10500 Thailand Tel 02-634-9944 , 02-235-8589 Fax 02-235-8590 e-mail address: info@VictorySystem.com